Classified Ad Title:
Maintenance Electrician I, II, or III - Treatment I

Post Date
11/13/2024

Expiration Date
1/12/2025

Details:
Position Description:
Maintenance Electrician I
Under supervision, inspects and troubleshoots electrical, electronic and pneumatic systems, components and equipment. Maintains, and repairs electrical circuits and related instruments and equipment. Calibrates, maintains and repairs electronic instruments, recording devices and systems including programmable systems incorporating microchip technology. Performs all aspects of electrical construction and maintenance.

Maintenance Electrician II
Under moderate supervision, inspects and troubleshoots electrical, electronic and pneumatic systems, components and equipment. Installs, maintains, and repairs electrical circuits and related instruments and equipment. Installs, calibrates, maintains and repairs electronic instruments, recording devices and systems including programmable systems incorporating microchip technology. Performs all aspects of electrical construction and maintenance. Pull as-built drawing and O&M from MSD’s electronic systems. May direct the work of other crew members and assists with training as needed.

Maintenance Electrician III
Under minimum supervision, inspects and troubleshoots electrical, electronic and pneumatic systems, components and equipment. Installs, maintains, and repairs electrical circuits and related instruments and equipment. Installs, calibrates, maintains and repairs electronic instruments, recording devices and systems including programmable systems incorporating microchip technology. Performs all aspects of electrical construction and maintenance. Pull as-built drawing and O&M from MSD’s electronic systems. Writes work orders or notifications within MSD’s work order system. Directs the work of other crew members and assists with training as needed.

Duties/Responsibilities:
Maintenance Electrician I
Utilizes technical knowledge and experience to interpret wiring diagrams, schematics, flow diagrams, blueprints, vendor publications and other documents. Regularly inspects electrical systems (high, medium and low voltage), electronic, hydraulic and pneumatic systems and components for serviceability. Identifies malfunctions and estimates equipment, materials and supplies required to correct malfunctions. Performs preventive and corrective electrical, electronic, pneumatic and hydraulic maintenance work on projects or systems. Uses relay logic/PLC logic in troubleshooting of electrical and instrumentation systems. Installs electrical, electronic, pneumatic and computerized systems. Diagnoses and repairs computer-related hardware and programmable devices. Repairs faulty circuitry at board and component levels. Installs, repairs and modifies piping for valves, regulators, meters and gauges. Regularly prepares and maintains records, reports, log books, and other data related to tasks performed. Drives vehicle to job sites to transport tools, equipment and materials. Responsible for recording time, materials and equipment. Keeps shop, work bench and job sites clean and orderly. Performs necessary housekeeping tasks. May perform mechanical maintenance work to expedite returning a system or equipment to service. May be requested to remove and install various sizes of motors and associated pulleys, belts, and couplings and perform basic alignment. Performs other related duties as assigned or as judgment/necessity dictates.

Maintenance Electrician II
Utilizes technical knowledge and experience to interpret wiring diagrams, schematics, flow diagrams, blueprints, vendor publications and other documents. Makes drawings/sketches of old and new systems. Regularly inspects electrical systems (high, medium and low voltage), electronic, hydraulic and pneumatic systems and components for serviceability. Identifies malfunctions and estimates equipment, materials and supplies required to correct malfunctions. Consistently meets time and specification requirements when performing preventive and corrective electrical, electronic, pneumatic and hydraulic maintenance work on projects or systems. Uses relay logic/PLC logic in troubleshooting/design of electrical systems. Installs electrical, electronic, pneumatic and computerized systems. Diagnoses and repairs computer-related hardware and programmable devices. Loads, executes and evaluates computer diagnostic programs; Repairs faulty circuitry at board and component levels. Installs, repairs and modifies piping for valves, regulators, meters and gauges. Regularly prepares and maintains records, reports, log books, and other data related to tasks performed. Drives vehicle to job sites to transport tools, equipment and materials. Responsible for recording time, materials and equipment. Keeps shop, work bench and job sites clean and orderly. Performs necessary housekeeping tasks. May perform mechanical maintenance work under emergency conditions. May perform mechanical maintenance work to expedite returning a system or equipment to service. May be requested to remove and install various sizes of motors and associated pulleys, belts, and couplings and perform basic alignment. Installs, repairs and modifies piping for valves, regulators, meters and gauges. Performs other related duties as assigned or as judgment/necessity dictates.

Maintenance Electrician III
Utilizes technical knowledge and experience to interpret wiring diagrams, schematics, flow diagrams, blueprints, vendor publications and other documents. Makes drawings/sketches of old and new systems. Regularly inspects electrical systems (high, medium and low voltage), electronic, hydraulic and pneumatic systems and components for serviceability. Identifies malfunctions and estimates equipment, materials and supplies required to correct malfunctions. Consistently meets time and specification requirements when performing preventive and corrective electrical, electronic, pneumatic and hydraulic maintenance work on projects or systems. Uses relay logic/PLC logic in troubleshooting/design of electrical systems. Installs electrical, electronic, pneumatic and computerized systems. Diagnoses and repairs computer-related hardware and programmable devices. Loads, executes and evaluates computer diagnostic programs; Repairs faulty circuitry at board and component levels. Installs, repairs and modifies piping for valves, regulators, meters and gauges. Regularly prepares and maintains records, reports, log books, and other data related to tasks performed. Drives vehicle to job sites to transport tools, equipment and materials. Responsible for recording time, materials and equipment. Keeps shop, work bench and job sites clean and orderly. Performs necessary housekeeping tasks. May perform mechanical maintenance work under emergency conditions. May perform mechanical maintenance work to expedite returning a system or equipment to service. May be requested to remove and install various sizes of motors and associated pulleys, belts, and couplings and perform basic alignment. Installs, repairs and modifies piping for valves, regulators, meters and gauges. Performs other related duties as assigned or as judgment/necessity dictates.

Education/Experience/Skills Required:
Maintenance Electrician I
High School Diploma or GED; three or more years experience working as a journeyman industrial electrician; an equivalent combination of education and experience may be substituted. Completion of a journeyman-level training program in maintenance of electrical systems (high, medium and low voltage) and in electronic, pneumatic instrument systems and digital technology is preferred. Must meet job knowledge and job skills assessment requirements. Must possess a valid driver's license. Must have an acceptable and reliable means for being contacted during off-duty hours. Must have safe work and driving habits.

Maintenance Electrician II
High School Diploma or GED; five or more years’ experience as an industrial electrician/instrumentation technician; an equivalent combination of education and experience may be substituted. Must hold a valid journeyman card or EE license through the State of KY or reciprocating State. Must have experience in working on medium and high voltage equipment such as 2400-4160 volt switchgear/motor controls and motors as well as various substation equipment ranging from 13.8KV to 138KV. Must have experience troubleshooting industrial motor controls. Must meet job knowledge and job skills assessment requirements. Must possess a valid driver’s license. Must have an acceptable and reliable means for being contacted during off-duty hours. Must have safe work and driving habits.

Maintenance Electrician III
High School Diploma or GED; seven or more years’ experience as an industrial electrician/instrumentation technician; an equivalent combination of education and experience may be substituted. Must hold a valid Master Electrical license through the State of KY or reciprocating State and a Certified Control Systems Technician Level 1 (CCST). Must have experience in working on medium and high voltage equipment such as 2400-4160 volt switchgear/motor controls and motors as well as various substation equipment ranging from 13.8KV to 138KV. Must have experience troubleshooting industrial motor controls. Must meet job knowledge and job skills assessment requirements. Must possess a valid driver’s license. Must have an acceptable and reliable means for being contacted during off-duty hours. Must have safe work and driving ha

Salary:
Maintenance Electrician I $37.02/hr.
Maintenance Electrician II $39.20/hr.
Maintenance Electrician III $41.56/hr.

Application Instructions:
Apply online
https://www.governmentjobs.com/careers/louisvillemsd/jobs/4716394/maintenance-electrician-i-ii-iii-treatment-i-4-positions-subject-to-shift?pagetype=jobOpportunitiesJobs